How to Clean SPC Flooring: A Complete Guide
SPC flooring is one of the most popular options for both homeowners and businesses alike because it is extremely durable, quite affordable, and pleasing to the eye. SPC flooring is highly resistant to water, stains, and scratches; therefore, it’s ideal for high-traffic areas. But with great strength also comes a little bit of maintenance to keep its beauty and longevity intact. Then this article will take you through the best way to clean SPC flooring so that it looks great for years.
What is SPC flooring?
SPC represents a type of rigid core vinyl flooring combined with limestone powder, PVC, and stabilizers. The peculiar mixture of materials endows the SPC floors with exceptionally good stability, water resistance, and soundproof qualities. On top, there is usually a high-definition printed design layer that gives it that realistic wood, stone, or tile appearance. SPC vinyl flooring is easy to install and very durable, so low maintenance it can be easily used in residential, commercial, and industrial areas.
SPC Flooring Advantages
(1) Durability: SPC flooring is highly resistant against wear, stains, and moisture. Also it can be installed in areas more predisposed to spills, such as kitchens or bathrooms.
(2) Water Resistance: SPC floors do not buckle or swell like hardwood or laminate when exposed to water.
(3) Easy Maintenance: The SPC floors are easy to clean and maintain, their new look retained with relatively little effort.
(4) Fashionable: SPC flooring is available in a wide range of color schemes and designs that can readily mimic the look of natural wood, stone, or tile.
Cleaning SPC Flooring – Step by Step
SPC flooring is easy to clean, and if a few basic precautions are taken, it will remain beautiful and long-lasting. Here’s a step-by-step guide in keeping your SPC floors spotless:
Step | Action | Tip |
Sweep/Vacuum | Remove dirt with a soft broom or vacuum. | Do weekly, more in high-traffic areas. |
Damp Mop | Mop with warm water and mild soap, avoid excess moisture. | Dry with a clean cloth after mopping. |
Spot Clean | Use mild soap or vinegar solution for tough stains. | Test on a small area first. |
Deep Clean | Sweep, vacuum, and mop with a vinyl floor cleaner. | Deep clean every 1-3 months. |
Prevent Scratches | Use felt pads and rugs; avoid harsh cleaners. | Replace pads as needed. |
Spill Response | Clean spills immediately with a cloth, and mop with mild cleaner. | Avoid abrasive pads. |
1. Regular Sweeping/Vacuuming
Cleaning off dirt, dust, and debris is the first step in maintaining your SPC floor. Regular sweeping or vacuuming prevents dirt from scratching the surface of the floor. Use a soft-bristled broom or a vacuum cleaner that has an option for hard flooring to avoid scratching the floor. Avoid the use of a vacuum with a beater bar that may scratch the surface.
Tip: Sweep or vacuum floors once a week, and even more often in high-traffic areas.
2. Damp Mop
After all the dirt and other particles have been taken out, take a damp mop over your SPC floor. Water must be minimal to block excess moisture from seeping into the seams and surely causing possible damage in the future.
Step by Step:
(1) In a bucket, add warm water with a few drops of mild pH-neutral dish soap or any cleaner made specifically for vinyl or SPC flooring.
(2) Dip the mop in water, wring it out thoroughly, and then mop the floor section by section.
(3) A microfiber mop is best because it will pick up dirt nicely and not show streaks in it.
(4) Dry the floors with an unused and totally dry cloth or towel after mopping to avoid puddling of water.
Tip: Use a half-wet mop since a fully soaking wet mop may rip the floor, especially at the seams.
3.Spot Cleaning of Resistant Stains
SPC flooring is resistant to stains; however, some spills or elements might require a little extra effort than others to clean. To take out stubborn stains, here is the process:
Step by Step:
(1) If the stains were due to food and beverages, use a soft cloth or sponge with warm water and a mild dish soap solution to gently scrub the area.
(2) In cases of oil-based stains or sticky substances, apply a mixture of vinegar and water to the area in a 1:1 ratio. Let it stay on for a few minutes, then scrub with a microfiber cloth.
(3) For heavy cleaning, commercial vinyl floor cleaners recommended by your SPC flooring manufacturer can be used.
Tips: It is important to make sure that a solution is always tested in a small area to avoid discoloration before using it on the entire area.
4.Deep Cleaning-Occasionally
Your SPC floor may need deep cleaning from time to time, mostly in high traffic areas, or if the dirt is readily visible upon observation. Deep cleaning will involve:
Step by Step:
(1) Sweep or vacuum the floor to eliminate all loose dirt and dust.
(2) Mop the floor with warm water mixed with a vinyl floor cleaner suitable for SPC flooring.
(3) A soft-bristle brush may also be used over grout lines or edges for a deeper cleaning. Avoid scratching the surface.
Tip: Deep cleaning can be performed every 1 to 3 months, depending on the amount of traffic the floor receives.
5.Scratch prevention and no damage
While SPC flooring is durable, these floors still need protection against scratches and damages.
Some of the ways to protect your floors include:
(1) Furniture Pads: Place felt pads underneath the furniture legs, so they do not scratch the floor when moving. Also, remember to check on the pads from time to time for their replacement.
(2) Avoid Harsh Cleaners: The floor should never be cleaned using products such as bleach, ammonia, or any other strong type of chemical. They will ruin the finish on the floor.
(3) Rugs or Mats: Place rugs or mats over high-traffic areas or near entryways to capture dirt and moisture before it reaches the floor.
Tips: Doormats at every entryway will catch most dirt and grit and keep it from being tracked onto the floor.
6.Spill Response
SPC flooring is highly resistant to water; however, for any moisture not to find their way through seams or edges, clean up spills as soon as possible. Cleaning Spills:
Step-by-Step:
(1) Mop up the spill at once with a clean cloth or absorb with paper towels.
(2) If necessary, mop with lukewarm water with a mild cleaning solution.
Tips: Avoid using abrasive sponges or scrubbing pads that may scratch the surface of the floor.
What to Avoid While Cleaning SPC Flooring
Some of the things one must avoid in cleaning SPC flooring in order to make it last for a further period are:
(1) Too Much Water: While the SPC flooring is water-resistant, too much water may burn the seams. A damp mop must be used and never soaking wet.
(2) Avoid Harsh Chemicals: Bleach, ammonia, or any harsh cleaning product would take off the finish to discolor.
(3) Heavy Scrubbing: Too much scrubbing, or the use of brushes with hard bristles, scratches the surface.
In Conclusion
Cleaning SPC flooring is pretty straightforward and simple, but by following the proper maintenance routine, it will keep your flooring looking good and extend its lifespan. Also it is highly crucial to regularly sweep it, do damp mopping, and remove spills/stains immediately to make your SPC floors last longer. A little bit of care and the right cleaning techniques will let you enjoy for years the durability and beauty of SPC flooring.
These care and maintenance practices will keep your SPC flooring a beautiful, durable feature of your home or business, with minimal effort to maintain that new look.
This is the detailed science about How To Clean SPC Flooring? If you want to know more, please feel free to contact us.
